 # Load on Column, Beam & Slab | Column Design Calculations pdf | How to Calculate Column Size for Building | Slab Load Calculation10 min read

Post Contents

## How to Calculate Load on Column, Beam & Slab

The total Load Calculation on Columns, Beam, Slab we must know about various loads coming on the column. Generally, the Column, Beam, and Slab arrangement are seen in a frame type of structure.

In the frame structure, the load is transferred slab to beam, beam to column and ultimately it reached the foundation of the building.

For load calculation of building, loads on the following elements are to be calculated,

## What Is Column

Column length is generally 3 times their least lateral cross-sectional dimension. The Strength of any column mainly depends on its shape and size of crosssection, length, location, and position of the column.

A Column is a vertical component in a building structure, which is mainly designed to carry the compressive and buckling load. The column is one of the important structural members of the building structure. As per Load coming on the column, size is increased or decreased.

## What Is Beam

The Beam is a horizontal structural member in building construction, which is designed to carry shear force, bending moment, and transfer the load to columns on both ends of it. Beam’s bottom portion experiences tension force and upper portion compression force. Therefore, More steel reinforcement is provided at the bottom compared to the top of the beam.

## What Is Slab

The slab is a level structural element of the building which provided to create a flat hard surface. These flat surfaces of slabs are utilized for making floors, roofs, and ceilings.

It is a horizontal structural member whose size may vary depending upon the structure size and area and its thickness also may vary.

But slab minimum thickness is specified for normal construction around 125 mm. Generally, every slab is supported by a beam, column, and wall around it.

## Load On Column, Beam & Slab

1) Column Self Weight X Number of floors

2) Beams Self Weight per running meter

3) A load of walls per running meter

Besides this above loading, the columns are also subjected to bending moments that have to be considered in the final design.

The most effective method for designing structure is to use advanced structural design software like ETABS or STAAD Pro.

These tools are reduced laborious and consuming methods of manual calculations for structural design, this is highly recommended nowadays in the field.

for professional structural design practice, there are some basic assumptions we use for structural loading calculations.

Read More: Steel Quantity Calculation Excel Sheet

## Column Design Calculation

### 1. Load Calculation on Column

we know that the Selfweight of Concrete is around 2400 kg/m3, which is equivalent to 240 kN and the Selfweight of Steel is around 8000 kg/m3.

So, if we assume a column size of 230 mm x 600 mm with 1% steel and 3 meters standard height, the selfweight of the column is around 1000 kg per floor, which is equal to 10 kN.

• Volume of Concrete = 0.23 x 0.60 x 3 =0.414m³
• Weight of Concrete = 0.414 x 2400 = 993.6 kg
• Weight of Steel (1%)  in Concrete = 0.414x 0.01 x 8000 = 33 kg
• Total Weight of Column = 994 + 33 = 1026 kg = 10KN

While doing column design calculations, we assume the selfweight of columns is between 10 to 15 kN per floor.

We adopt the same method of calculations for beams also.

we assume each meter of the beam has dimensions of 230 mm x 450 mm excluding slab thickness.

Assume each (1m) meter of the beam has a dimension

• 230 mm x 450 mm excluding slab.
• Volume of Concrete = 0.23 x 0.60 x 1 =0.138m³
• Weight of Concrete = 0.138 x 2400 = 333 kg
• Weight of Steel (2%) in Concrete = 0.138 x 0.02 x 8000 = 22 kg
• Total Weight of Column = 333 + 22 = 355 kg/m = 3.5 KN/m

So, the self-weight will be around 3.5 kN per running meter.

we know that the Density of bricks varies between 1500 to 2000 kg per cubic meter.

For a 6 inch thick Brick wall of 3meter height and a length of 1 meter,

The load / running meter to be equal to 0.150 x 1 x 3 x 2000 = 900 kg,

which is equivalent to 9 kN/meter.

This method can be adopted for load calculations of Brick per running meter for any brick type using this technique.

For aerated concrete blocks and autoclaved concrete blocks, like Aerocon or Siporex, the weight per cubic meter is between 550 to 700 kg per cubic meter.

if you are using these blocks for construction, the wall loads per running meter can be as low as 4 kN/meter, the use of this block can significantly reduce the cost of the project.

Let, Assume the slab has a thickness of 125 mm.

So, the Selfweight of each square meter of the slab would be

= 0.125 x 1 x 2400 = 300 kg which is equivalent to 3 kN.

Now, If we consider the Finishing load to be 1 kN per meter and the superimposed live load to be 2 kN per meter.

So, from the above data, we can estimate the slab load to be around 6 to 7 kN per square meter.

### 5. The Factor of Safety

In the end, after calculating the entire load on a column, do not forget to add in the factor of safety, which is most important for any building design for the safe and convenient performance of the building during its design life duration.

This is important when Load Calculation on Column is done.

As Per IS 456:2000, the factor of safety is 1.5.

## How to Calculate Column Size For Building

A column is one of the important elements of any building structure. The column size for the building is calculated as per load coming on the column from the superstructure.

For buildings with heavy loading conditions, the column size is increased. The column size is an important factor while designing any building structure.

Difference column sizes used in building design,

• 9″ x 9″
• 9″ x 12″
• 12″ x 12″
• 12″ x 15″
• 15″ x 18″
• 18″ x 18″
• 20″ x 24″
• As per Structural load, more sizes can be used.

For Column size calculation we required the following data,

(Note: Minimum size of the column should not be less than 9″ x 9″ ( 230 mm x 230 mm)

The following are column design calculations steps to decide the size of the column for the building.

Pu = 0.4 fck A+ 0.67 fy Asc ( Clause No: 39.3 Page No: 71 IS 456:2000)

• Pu = Axial Load on Column
• fck = Characteristics compressive strength of concrete
• Ac = Area of Concrete
• fy = Characteristics Tensile strength of concrete
• Asc = Area of Steel Reinforcement
• Ac = Ag – Asc
• Asc = 0.01 Ag
• Ac = 0.99 Ag

Where Ag =  Gross Area of Column

Consider 1% of Steel in Column,

Ac = Ag – Asc

Example: Design an RCC square short column subjected to an axial compressive load of 600 KN. The grade of concrete is M -20 and the Grade of steel is Fe -500. Take Steel 1% and Factor of safety = 1.5.

Pu = 600 KN, fck = 20 N/mm2, fy = 500 N/mm2, Steel = 1%, Factor of Safety = 1.5

Pu = Axial Compressive Load on Column = 600 KN

Factored load on column = Pu = 600 x 1.5 = 900 KN

P= 0.4 fck A+ 0.67 fy Asc

900 x 103 = 0.4 x 20 x (0.99 Ag) + 0.67 x 500 x (0.01 Ag)

900 x 103 = 7.92 Ag + 3.35 Ag

900 x 103 = 11.27 Ag

Ag = 79858 mm2

For Square Column,

Size of Column = √79858

Size of Column = 282.59 mm

Provide square column size 285 mm x 285 mm

Ag = Provided = 81225 mm2

Asc = 0.01 Ag = 0.01 x 81225

Asc = 812.25 mm2

Provide 8 Nos of 12 mm Dia steel with an area of steel = 905 mm2

The size of the column for 600 KN load is 285 mm x 285 mm (12″ x12″)

## FAQs

### How do you calculate beam load?

Factors contributing to the total load of the beam are the Weight of Concrete and the Weight of Steel (2%) in Concrete.
Hence the Total Weight of the beam = Weight of Concrete + Weight of Steel.
The Approximate load of a beam of size 230mm x 450mm is around 3.5 KN/m.

### How do you calculate slab load on a beam?

Generally, the slab has a thickness of 125 mm. So, the Self-weight of each square meter of the slab would be the product of the thickness of the slab and per meter square load of concrete which is estimated at around 3KN.
The total slab load will be around 6 to 7 kN per square meter.

### How to proceed with Wall Load Calculation?

1. The density of brick walls with mortar is in the range of 1600-2200 kg/m3. So we will consider the self-weight of the brick wall as 2200 kg/m3
2. We will consider dimensions of brick wall as Length = 1 meter, Width = 0.152 mm, and Height of = 2.5 meter, Hence Volume of wall = 1m× 0.152 m× 2.5 m = 0.38 m3
3. Calculate the dead load of brick wall, which will be equal to, Weight = volume × density, Dead load = 0.38 m3 × 2200 kg/m3 = 836 kg/m
4. Which is equal to 8.36 kN/m is the dead of the brick wall.

### What is a Column?

A Column is a vertical component in a building structure, which is mainly designed to carry the compressive and buckling load. The column is one of the important structural members of the building structure. As per Load coming on the column, size is increased or decreased.

Calculation of Dead load for Building= Volume of member x Unit weight of materials.
It is done by simply calculating the accurate volume of each member and multiplying by the unit weight of the respective materials from which it is composed, and dead load can be determined for each component.

Volume of Concrete = 0.23 x 0.60 x 3 =0.414m³
Weight of Concrete = 0.414 x 2400 = 993.6 kg
Weight of Steel (1%)  in Concrete 0.414x 0.01 x 8000 = 33 kg
Total Weight of Column = 994 + 33 = 1026 kg = 10KN

300 mm x 600 mm excluding slab thickness.
Volume of Concrete = 0.30 x 0.60 x 1 =0.18 m³
Weight of Concrete = 0.18 x 2400 = 432 kg
Weight of Steel (2%) in Concrete = 0.18 x 2% x 7850 = 28.26 kg
Total Weight of Column = 432 + 28.26 =  460.26 kg/m = 4.51 KN/m

A Column is a vertical component in a building structure, which is mainly designed to carry the compressive and buckling load. Column length is generally 3 times their least lateral cross-sectional dimension. The Strength of any column mainly depends on its shape and size of cross-section, length, location, and position of the column.

By calculating the volume of each member and multiplying by the unit weight of the materials from which it is composed, an accurate dead load can be determined for each component.

For Live Load calculation, you have to follow the permissible Live load values in IS-875. Generally, for residential building purposes, we take it 3 KN/m2. The value of LIVE LOAD is changed as a type of structure & for that, you have to see IS-875

You Might Also like:

### 9 thoughts on “Load on Column, Beam & Slab | Column Design Calculations pdf | How to Calculate Column Size for Building | Slab Load Calculation”

1. Md Khaibul Alam

Very useful tips its help every engineer in their field.please send that type of tips for civil engineering frequently.

2. Gopal Behera

#Useful

3. Habibur rahman

Indeed these tips are very useful & helpful in the working field

4. if we have 4 columns in a floor , should we multiple 10kn x 4 columns to find load? or we can put 10 kN for one floor randomly?

5. Interestingly this article has the same errors as seen on another post from 2011

6. Manjunath hukkeri

Seriously I just loved the explanation
U explained each and every bit of it very cleanly

7. bodrick ikumbuko

thanks for the help i really needed

8. V Ranjith Kumar

good

9. Azeez Akande

Can I have your what’s app number sir?

### Popular Post on Website #### 15 Types of Fans | Different Types of Fans For Home | Ceiling Fan Type | Best Fan Types & Their Uses #### 22 Types of Drill Bits | Drill Bit Types And Uses | Different Drill Bits Name | Best Drill Bits For Cutting Work #### 40 Types Of Tables | Different Types of Tables | Best Types Of Table For Living Room | Different Kinds Of Tables #### 10 Types of Shovels | Different Types of Shovels With Pictures | Best Shovels For Digging Work #### 15 Different Types of Plywood | What Is Plywood and Their Types | 15 Best Types of Plywood for Furniture #### 30 Types of Clamps and Their Uses | 30 Different Types Clamps and Uses | Best Clamps For Home Uses #### 10 Concrete Finishes Types | 10 Best Types of Concrete Finishes | Different Concrete Finishes | Concrete Surface Finishes #### 25 Types of Hammers | Different Types of Hammers and Their Uses | Top 25 Hammers Types #### 10 Different Types of Ladders and Their Uses | Best Types of Ladders | Material Used For Ladders #### 17 Types Of Contractors | What Is Contractor | 17 Different Types of Contractors | List of Contractors #### 13 Types of Door Hinges | Types of Hinges Used For Door | Different Types Of Door Hinges | What Is A Butt Hinge #### 40 Types of Bridges | Classification of Bridges | 40 Different Types of Bridges Used In The World #### 10 Most Popular Types of Fencing | Types of Fence | Different Styles of Fencing | Fences for Yard ﻿
x

### Related Posts

When Do You Need Steels for Property Builds and Refurbishments?
Steel is swiftly becoming more and more popular as a building material across all fields of construction - including in both domestic and commer...
What Is PCC Concrete | Plain Cement Concrete | PCC In Construction | PCC Full Form | PCC Ratio | PCC Grades | PCC Meaning In Civil
What Is PCC Concrete? The term PCC refers to Plain Cement Concrete. PCC is the mixture of cement, fine aggregate(sand), and coarse aggregate ...
Building Materials List | Building Construction Materials List | Construction Materials List | Construction Materials Name List with Pictures
What Is Building Materials? “Building material is the material which is used for the construction purpose.” Each building material possess... 