Types of Drill Bits: How To Select Perfect One

Drill bits are an essential tool for any DIY enthusiast or professional tradesperson. They are designed to make drilling holes in various materials such as wood, metal, and plastic a breeze. There are several types of drill bits available in the market, each with a specific purpose and unique design.

Some common types of drill bits include twist bits, spade bits, hole saws, auger bits, and masonry bits. The selection of the right drill bit depends on the material you are drilling, the size of the hole you want to create, and the type of drill you are using.

Understanding the different types of drill bits can help you make the best choice for your project, ensuring that you achieve the desired results.

Types of Drill Bits

The following are types of drill bits,

Flat Drill Bits

Flat Drill Bits
Flat Drill Bits

Commonly, the Flat Drills are made of a slender stick of High Carbon Steel, and their cutting edge is tempered in shape and hardened.

So that it can be made in any size and shape easily also these types of drills are cheap, the flat drills are used to bore holes in soft metals and carpentry work.

Flat Drills are not used for the borehole in iron material,  but the biggest advantage of a flat drill is used for solid metals, and their cutting points are kept at a 90-degree angle, whereas any other type of drill gets broken.

Read More: Brick Anchors | 5 Types of Brick Anchors | Screw For Bricks | Best Screw Bricks

Twist Drill Bits

Twist Drills Bits
Twist Drills Bits

Generally, the thick drills and twist drills are used to the borehole in accurate size, quickly, and cleanly and this is generally made of thin rods of alloy steel and high-speed steel.

Straight Fluted Drill Bits

Straight Fluted Drill
Straight Fluted Drill Bits

This Straight Fluted Drill Consists of flutes or grooves that are running parallel to the axis of a drill but this drill is not suitable in standard practice and does not automatically pop out of the hole.

The Straight Fluted Drills are essentially used in copper, drilling brass, or other softer materials, the drilling twist brass moves faster than a drill feed, and they dig or drill into the metal.

Double Fluted Drill Bits

Double Fluted Drill Bits
Double Fluted Drill Bits

These Double Fluted Drills are suitable for all types of work because it is stronger and best than other types of drill. These two flutes of drills are opposite each other.

Read More: 30 Types of Clamps and Their Uses | 30 Different Types Clamps and Uses | Best Clamps For Home Uses

Multi Fluted Drill Bits

Multi Fluted Drill Bits
Multi Fluted Drill Bits

Multi-Fluted Drills as the name suggests it has more than two flutes in the drills and this feature distinguishing is due to their bigger edge of cutting so that boring a hole quickly and also clean quickly, and multi fluted drills are used for special jobs.

Centre Drill Bits

Centre Drill Bits
Centre Drill Bits

A Centre Drill is also known as a Combination Drill and this drill Countersinking and drilling can work simultaneously and also this drill is used for Fastening.

Counter Sinking Drill Bits

Countersink Drill Bits
Countersink Drill Bits

Where the counter head screws are to be installed at that place, countersinking is drilling the holes. And its Cutting Point of ground at 60 Degrees or 82 Degrees.

Counter Boring Drill Bits

Counterboring Boring Drill Bits
Counterboring Boring Drill Bits

The counterboring drills are also known as counterboring Cutters. When Allen Screws are fit then counterboring is a Work Drill, These Allen screws also fixing like a Counter Screw on the Work Surface.

Generally, the Counter Boring Drills are used for enlarging a Hole, and hole boring did up to the height of the Screw Head. Also, the boreholes are cut at 60 degrees to 82 degrees angle slanting from the top.

Spirec Drill Bits

Spirec Drill Bits
Spirec Drill Bits

The Spirec Drills are delicate type drills, and are also used for boring a hole in the store nipple, Spray Pump Nozzle, Etc. and their range of size is 0.0086” to 0.0984”.

Shell Drill Bits

Shell Drill Bits
Shell Drill Bits

Shell Drills are a unique type of drill, and they consist of four flutes also their upper parts are 1/3” / Foot in taper shape and shape like a face cutter and side cutter.

Generally, Shell Drills are used for enlarging the boreholes, and milling works.

Step Drill Bits

Step Drills are mainly used for drilling holes in sheet metal and the appetence of this drill is like a descending shape of a ladder step drills are costly. If you work regularly with a metal sheet then only you can purchase otherwise you won’t purchase it.

The Step Drills are allowing to you drill borehole of various diameters and the other thing is it makes de-burr holes and also you can easily clean out the waste material.

Installer Bits

22 Types of Drill Bits | Drill Bit Types And Uses | Different Drill Bits Name
Installer Drill Bits

These installer Drill bits are used for drilling holes and installing wires for security systems and entertainment purposes and the installer bits look like auger drill bits.

The installer bits are long up to 18 inches and also use this drill through masonry, wood, and plaster.

Masonry Bit

Rivet Drill Bit
Masonry Drill Bits

Masonry Drill Bits are used where stone, Concrete, and brickworks are going on, and then whenever those wear out you need to replace them.

Same thing if you want to drill into the Concrete for a long period then it causes the tip to be melted. You can easily change the drill out of the concrete so that it can reduce the problem.

Rivet Drill Bits

Rivet Drill Bit
Rivet Drill Bit

The Rivet Drills are mainly designed for drilling tiny rivets into a piece of thin Sheet metal.

Read More: 10 Types of Concrete Anchors | Anchor Bolts For Concrete | 10 Best Anchors For Concrete

Auger Drill Bits

Auger Drill Bits
Auger Drill Bits

The auger drill bits are used for making a hole in dry wood and thick wood; also you don’t apply too much pressure.

Tile Drill Bits

Tile Drill Bit
Tile Drill Bit

This tile drill bit Consists of a carbide tip to drill into a certain tile that reduces the chance of cracks and chips. 

Hammer Drill Bits

Hammer Drill Bit
Hammer Drill Bit

This Hammer Drill Bit is used for drilling a precise hole in the slab which is required for relative humidity and completion.

 Glass Drill Bits

Glass Drill Bits
Glass Drill Bits

The glass drill bits are used to drill plastic, glass, brick, marble, composite material, hollow brick, and some others,s and also this glass drill has excellent to resist high temperatures.

 Forstner Bits

Forstner Drill Bits
Forstner Drill Bits

Forstner Drill Bit makes a smooth and clean hole in any type of wood, and also its pointed tip helps to keep the drill exactly where you want.

Hole Saw

Hole Saw
Hole Saw

Hole Saw-type drills are used for installing a door, hardware, and wiring pass-through. This hole saw creates a useless side cut out and plugs in the saw and pushes it out.

The small hole saws include a built-in shank rather than a pilot bit, also bi-metal hole saws make a hole in metal and wood.

Plug Cutter

Plug Cutter
Plug Cutter

The plug cutter creates a hole in the wood and also cut a wooden plug together, also used for wooden professional work.

Read More: 28 Tiling Tools Used In Flooring Work | Tools for Tiling | Tools For Tile Work

Conclusion

In conclusion, drill bits are a fundamental cutting tool used in construction, manufacturing, and DIY projects to create cylindrical holes in various materials, such as wood, metal, plastic, and concrete.

Drill bits come in a wide range of shapes and sizes, and the type of bit used will depend on the material being drilled, the size and shape of the hole required, and the desired level of precision.

Common types of drill bits include twist bits, brad point bits, spade bits, masonry bits, Forstner bits, and countersink bits, each of which is designed for specific materials and applications.

With proper selection, maintenance, and use, they can help ensure that holes are drilled accurately and efficiently, helping to create strong, reliable structures and products.

Summary:

Type of Drill BitDescription
Twist Drill BitStandard, versatile design for general-purpose drilling.
Brad Point BitPointed tip for precise and clean hole starts in wood.
Spade BitFlat, paddle-shaped for fast drilling in wood.
Forstner BitIdeal for drilling flat-bottomed holes with clean edges.
Masonry BitDesigned for drilling into concrete, brick, or stone.
Auger BitLong, spiral design for deep holes in wood.
Hole SawCylindrical with saw teeth for cutting large holes.
Countersink BitCreates a conical recess for screw heads in wood.
Step BitGraduated steps for drilling holes of various sizes.
Diamond Drill BitUsed for drilling into hard materials like glass or tile.

You May Also Like:F

Share This Post

Leave a Reply

Download Construction Excel Sheet

Scroll to Top
DMCA.com Protection Status