A drywall alternative is any material that can be used instead of traditional drywall, which is a type of wall and ceiling panel made of gypsum plaster sandwiched between two layers of paper. Drywall is a common building material used in residential and commercial construction because it is relatively inexpensive, easy to install, and fire-resistant.
However, there are situations where drywall may not be the best choice, such as in areas with high moisture or humidity, or where a different aesthetic is desired. In those cases, a drywall alternative can be used. Some examples of drywall alternatives include wood paneling, plywood, cement board, metal panels, fabric panels, and plaster.
The choice of which material to use will depend on factors such as budget, durability, aesthetics, and ease of installation.
Drywall Alternatives
The following are the most popular cheap drywall alternatives one should choose,
1. Wood Planks
Wood planks are an age-old drywall alternative, and certainly stood well the test of prolonged duration. It gives an elegant and rustic feel to the home without much bothering for maintenance issues as against traditional drywall.
Pros
- There is no need to maintain it apart from keeping them dry, once the plank has been hung, especially if planks are sealed with a light lacquer finish that can be easily wiped to remove the marker.
- Gives the flexibility of a lot of variety due to the different availability of woods and finishes.
- It is a cost-effective drywall alternative, especially suited to country-style homes.
- Wood planks covered from floor to ceiling can pull off a cabin aesthetic easily.
- Easy to install.
- Washable.
- Suitable for high moisture areas.
Cons
- Honestly, it is out of style in the 1990s.
- Wood plank walls won’t be the best fit unless the bottom half is covered and protective chair rails are installed.
Read More: What Is Gabion Wall | Gabion Retaining Wall | Gabion Basket Wall
2. Veneer Plaster
Veneer plaster is almost like mudding the entire surface of the wall. It is very similar to the stucco that is used on the exterior of the house along with wire mesh of any type.
Usually, this style of décor is found in dry states(desert areas) like Arizona and Rajasthan possessing the influence of Mexican-style adobe architecture.
Pros
- Simpler to use than traditional drywall as it doesn’t require as many skills or tools as hanging traditional drywall does.
- Lighter
- Cost-effective
Cons
- Although it is not difficult practically it can take up the whole day to get the job done. So, it is proven to be the most laborious and time-consuming drywall alternative.
- Less durable
3. Lath & Plaster
Lath is a narrow strip of wood installed horizontally between studs or ceiling joists. Lath & Plaster consists of plastering the lath.
This is similar to medieval-style (middle-aged architecture) wattle and daub (a material consisting of a network of interwoven sticks and twigs covered with mud or clay). Wood, hand-split timber, newer rock, or metal can be used as lath.
Pros
- Gives an elegant aesthetic due to its non-flat walls or curvy surface nature in the corner of the room, which isn’t possible in other methods except stucco.
- Plaster incorporating the horsehair gives a stronger and more visible texture to the surface.
Cons
- Can look great by adding some texture to the wall but it is out of favor due to advancements in plasterboard and drywall.
4. Plywood and Sheet Wood
Plywood and sheet wood, are fairly straightforward to work, and less complicated than drywall.
Pros
- The cheapest drywall alternative to drywall without taking on the expenses of wood planks, veneer, or drywall.
- When coupled with certain types of wall decoration especially surfaced sheet wood can pull off a deep country feel.
- Can be colored as per convenience.
- Lightweight and water-resistant.
Cons
- Unlike drywalls, certain types of plywood do not have the access to more features like hanging decorations and moving them.
- It is very hard to cover mistakes through screw or nail holes.
- Not fire-resistant.
5. Texture Wall Panels
Texture wall panels are nothing but marble itself, which adds a lot of elegance and beauty to the home. Earlier its generally seen in hotels and expensive cocktail lounges.
It consists of 3D textured panels that are easy to install and can be placed right on top of your existing wall, possessing a thickness of 3/4” to 1.5”.
Pros
- Facilitate the different kinds of designs and colors, mimicking aged bricks as per one’s choice.
Cons
- Unique but expensive.
- Brick & Masonry
Read More: Precast Compound Wall Cost Calculator | Boundary Wall Construction Cost Calculator
6. Brick & Masonry
Stone or brick walls are the evergreen style of walls. Usually seen in suburban homes. It is also possible to have one brick wall along with three drywalls.
Pros
- Facilitates dynamic coloring depending on choices.
- Sustainable options that last without maintenance and cleaning except dusting.
Cons
- This is more expensive than all drywall alternatives and even costlier than drywall.
- Exposed Concrete Block
7. Exposed Concrete Block
The exposed concrete block is a raw, untouched finish, which means leaving the structural surface of the wall as it is.
Its beauty lies in the incompletion, which can be painted to achieve a textured panel look. In combination with modern décors such as glass and black furniture and high ceiling will ultimately give an amazing look.
Moreover, the arrangement of room furniture, light in the room, etc governs its aesthetic.
Pros
- Attractive
- Strong
- Durable
- Fire-resistant
Cons
- Tougher to decorate the exposed concrete wall frequently.
- Holds dirt and water.
- Possess minimal insulation properties.
8. Cement Board
Cement board is similar to brutalist architecture as it possesses lots of right angles, flat surfaces, and concrete everywhere.
Pros
- Suitable in areas having high moisture.
- Use to visualize staircase pop.
Cons
- Price.
- If used on all four walls, it gives the feeling of a dystopian nightmare. So, it is recommended to use them for one wall out of four.
Read More: What Are Wall Texture | 10 Types of Wall Texture | Drywall Texture Types
9. Pegboard
Pegboards are preferred in art rooms, hobby rooms, or garages.
Pros
- Easy to install, with the help of screws, that can be further painted of color same as of boards.
- Possesses lighting characteristics, i.e., the ability to double the brightness without installing any extra light fixtures.
- Facilitates the hanging of the heaviest as well as largest tools.
- Possesses the next level of strength, capable to support shelves.
Cons
- Huge weight can cause a meltdown and might fall off.
10. Cork Board
Corkboards are similar to pegboards with a limitation of incapability to support much weight.
Pros
- Facilitate a variety of choices due to hues of color, thickness, sizes of cork chip compressed, etc.
- Helps in scattering the light.
- Provide thermal and acoustic insulation.
- Fire and moisture resistance.
Cons
- Inadequate randomization of design across an entire wall.
- Capable to hang photos or thumbtack of lightweight.
- Not durable.
11. Wahoo Walls
Wahoo walls are meant for covering a cinderblock or concrete basement wall. It looks similar to drywall. So, It become one of the simple drywall alternatives on the market.
Pros
- Moisture resistant.
- No need to screw in the walls.
- Easily removable panels.
- Fast installation.
- Breathable walls and ceiling.
- Good R-value.
Cons
- Expensive.
- No DIY option.
- No flooring.
- The walls have seams.
- Reinforced Fiberglass & Gypsum Panels
You May Also Like
GFRG Panel: Cost, Price, Construction, and Disadvantages of GFRG Panel House
Understanding Noise Pollution: Effects, Prevention, and Solutions for a Quieter Environment
Types of Natural Disasters: 18 Catastrophic Events Explained | Definition and Classification of Natural Disasters
Concrete Mix Design Calculation | Mix Design Excel Sheet
Types Of Concrete Finishes
21 Different Types of Sofas for Your Living Room