After detailed planning and designing of construction work by the architect and structural designer, the next step is to start actual construction work on site.
Generally, most of the construction work begins with foundation construction. Foundation construction is the most critical work among all activities on the construction sites. Foundation is the main base and support for all the above structures.
Foundation construction is a crucial stage as the dimensions of the foundation have to be entirely right because otherwise, future spaces will be affected. The depth of the foundation depends on the type of soil, and the site conditions decide the design of the foundation.
The foundation layout and excavation depth details are prepared by the structural designer and approved by the Architect.
What is Foundation?
Foundation is the bottom-most part of any structure, which has the primary function is to take load coming from upper components and safely transfer it to the below soil. Generally, foundations are of two types, namely shallow foundation, and deep foundation.
Shallow foundations are suitable up to a depth up to 1.5m and deep foundations extended up to hard strata below the ground surface having a depth of more than 1.5m.
A shallow foundation is constructed for a structure that has a horizontal spread more than a vertical height.
A deep foundation is most suitable for high-rise buildings like a skyscraper or a castle built on very weak. If any structure is to be extended vertically in the future, then a deep foundation must be suggested.
Width of Foundation/Footing
Structural Design is the main component to consider before laying Foundation/Footing. For small buildings such as houses, flats, school buildings, etc not having had not more than two stories, the width of the foundation should be as given below,
- For one brick-thick wall, the footing should not be less than 75 cm in width.
- It should not be less than 1 meter in terms of width for one and a half-brick wall.
The Function of the Foundation
- Foundation provides the main base for any structure.
- It provides stability and strength to the main building structure.
- Foundation provides a level surface for the construction of the substructure.
- It distributes the structural load evenly into the ground.
- Foundation reduces the load intensity within the safe bearing capacity of the soil.
- It is safe the soil movement effect is resisted and prevented.
Read More: 15+ Types Of Drawings In Construction
Foundation Construction Steps
Following are the steps in foundation construction,
1. Foundation Layout
The Contractor has to follow the foundation layout drawing for excavation prepared by the structural designer and approved by the Architect.
As per the foundation layout plan marking is done on-site, and the Architect cross-checks the dimensions.
Foundation marking should give extreme importance. If there is any mistake can b brought to the Architect’s and contractor’s notice, So that they quick action to rectify the error.
2. Excavation
Once the final foundation layout marking has been approved, the excavation can begin. Start excavation work and continuously check the work process. Never excavate soil beyond the depth specified by the architect in the drawing.
In the case of deep foundations like pile foundations, the depth of the foundation is not specified, but it is up to hard strata is given.
As excavation work progress, check if there is a requirement of providing support to the soil against collapse.
3. Filled-up Soil
If construction is to be done on lakes or low-lying areas, it may have a lot of filled-up soil. In such type of filled-up ground, excavation must be done till the firm ground is reached.
This will obviously increase the depth of the foundation and consequently, the cost of the foundation will be very high. But, Never compromise on this.
Always make sure that building the foundation rests on hard strata if it means you have to go 15 feet down because otherwise, it will affect the stability and strength of the house.
4. Excavation Trenches/Pits
The excavation details depend on the construction method that you have decided to adopt, the load-bearing-wall system, or the column-beam-frame structure system.
In the case of a load-bearing structure, trenches are excavated along the wall. If it is framed structure, then excavation is done below every column up to the footing base.
All work should be done as per drawings and instructions given by architects and structural designers.
Read More: What Is The Strongest Foundation For A House
5. Anti-termite Treatment
Before starting foundation construction, make sure that the trenches and excavated areas have been given the anti-termite treatment by the Contractor. This anti-termite treatment ensures protection against termites and other pests from underground, in the future
6. Foundation Construction
Once Excavation work is done for the foundation, the next step is to Start the foundation construction.
Load-bearing structure foundation: A bed of concrete (PCC) is laid at the base of trenches and over it, the brick or stone masonry is constructed in accordance with the foundation details provided by the structural designer.
Column-beam frame structure system: In this system column footing is constructed in the trench. There are different types of footing used in building construction like spread footing, pad footing, Trapezoidal column footing, Mat foundation, etc.
In this case of isolated pad footing, steel bars tied together according to the structural engineer’s specifications are placed at the bottom of the footing pit. Column steel bars are also tied in place with the help of a bonding wire. Column formworks are erected around it for pouring concrete.
Pouring concrete: Before pouring concrete into the formwork architect and structural designer have approved the steel details and the quality of work, and the concrete can be poured. Concrete for pouring can prepare on-site or the contractor may opt for ready mix concrete (RMC) if there are very large footings and large requirements for concrete.
Plinth Beam: After the column is constructed up to the Plinth beam level, the plinth beam is erected for the walls of the house to rest on.
7. Curing of Foundation
Immediate curing of concrete components is an essential task on any construction site. If the Curing of concrete is not done properly, cracks can appear and even the strength and life of the building components can be affected.
Curing ensures sufficient water is available for the chemical reaction which provides strength to concrete.
The chemical reaction during curing: There are two types of chemical reactions that take place in concrete one that releases heat during the process (Exothermic) and another that absorbs heat (Endothermic).
The process of mixing cement with water is an exothermic reaction due to the presence of limestone. Because of this heat production, the water in the mortar or concrete mix evaporates even before the compound gains strength.
For a structure to achieve maximum strength the chemical reactions in cement compound must go on and this can happen only in the presence of water and at ambient temperature.
Hence, it is required to supply extra water content and the ambient temperature and this is achieved by regular curing.
It is important in any foundation construction to start the curing process as early as possible.
8. Starting the Curing Process
Curing should always start the very next day after the concrete has been poured. In the earlier stages, concrete elements absorb water more, but after a week, the water required will be much less.
In case there is excessive water runoff on a concrete surface when water is poured on new construction, curing should be stopped. As the outside temperatures are higher more amount of curing is required.
Curing schedule: Concrete element curing should be done at least twice a day through three times is better. Ensure that you’re Contractor gives this job to a specified person so that it is not forgotten.
Requirement of Good Foundation
Good Foundation needs a structure because of the following reasons,
The foundation forms the base of any Structure, the whole stability of the structure is dependent on the foundation. Even a minor error might take a destructive form. Hence a good foundation with precise construction is recommended.
The structure might undergo settlement during its life span. Settlement of Structure is the defendant on the Foundation, such that a good foundation can avoid a differential settlement.
A good foundation can guard against any form of damage or distress transferring the load evenly to the soil.
Care is taken that the site for laying the foundation must not undergo any stress or be affected because of future works in the surrounding.
One of the requirements of Good Foundation is that it should be capable of transmitting deadly as well as live load to the soil beneath.
What is the Purpose of The Foundation?
Any Foundation of Structure serves the following Purposes,
Stability to a structure is provided by the means of foundation. A good and sound foundation ensures better stability of the structure.
Foundation is meant to transfer the dead as well as live load efficiently to the soil.
The foundation laid in a proper manner provides a reliable base for the further construction of the substructure as well as the superstructure.
Foundations maintain the stability of the structure during natural calamities such as earthquakes and floods and protect it from collapsing.
Differential settlement of structure can be avoided which might cause the tilting of the structure.
Conclusion
In conclusion the foundation construction steps for a house are vital in establish a strong and stable foundation, this step include site preparation, excavation, footing, formwork installation, reinforcement placement, concrete pouring in foundation, curing the foundation and backfilling, are essential for ensuring the structural integrity and longevity of the house.
By following this step carefully, builders can create a solid foundation which can support the entire structure and it withstand the test of time.
Adhering to local building codes and regulations, consulting professionals and paying attention to detail throughout the process are key factors in achieving a successful foundation construction for a safe and durable house.
FAQs:
What is shuttering in construction?
Shuttering, also known as formwork, is a temporary structure used in construction to support freshly poured concrete until it reaches sufficient strength to support itself.
What is traditional timber shuttering?
Traditional timber shuttering is a common method of creating formwork using wooden boards and supports.
What is engineered formwork?
Engineered formwork is a type of shuttering that is designed to be reusable and durable. It is typically made of steel or aluminum and can be adjusted to fit various sizes and shapes.
What are the benefits of using shuttering?
Using shuttering can help ensure that concrete is poured and set in the correct shape and position. It can also improve safety by providing support and stability during construction.
You May Also Like:
Well Point System: Single & Multi Stage Well Point System
10 Best Steel for House Construction
Drinking Water Quality Standards (WHO Guidelines)
Tiles Popping Up: How To Repair Pop Up Tiles
10 Best Water Tank In India 2024
50 False Ceiling Designs: Inspiring Ideas for Halls, Bedrooms, Hotels, and Restaurants