Types Of Hammers & Their Uses

A hammer is a tool used for driving nails, breaking objects, or striking surfaces. It typically consists of a handle, known as a shaft, which is attached to a solid and heavy head made of materials such as steel, wood, or plastic.

The head of the hammer is often shaped differently depending on the intended use of the tool. For example, some hammers have a flat face for driving nails, while others have a curved or pointed face for specific tasks such as breaking concrete or shaping metal.

There are different types of hammers such as Claw Hammer, Cross Peen Pin Hammer, Sledge Hammer, BallPeen Hammer, Rubber Hammer, Tack Hammer, Dead Blow Hammers, etc.

Types of Hammers

Here are various types of hammers, each used for specific work,

1. Claw Hammer

Claw hammers are available in a variety of materials, styles, and lengths, as well as having a smooth striking face and weighing anywhere from 8 to 20 ounces.

The curled claws on the back of the hammer, as well as the peen on the back of the hammer, are well-known features. Its curved metal tines provide more leverage when removing nails, staples, or anything else embedded in wood or other material.

2. Cross Peen Pin Hammer

Cross Pin Hammer — Cross Peen Pin Hammer

This instrument is not appropriate for metalworking and is a modest variant of the cross-peen hammer. It’s best used for cabinetry, light joinery, and other woodworking projects.

The cross peen pin hammers are a smaller variant of the cross peen hammers, designed for use on wood rather than metal or other hard materials. It features the same tiny classic hammerhead and wedge head but is more suited to light joinery and complicated cabinetry.

Because of their small weight, the Cross Peen Pin types of Hammers are suitable for working with delicate fabrics.

3. Sledge Hammer

Straightening round rods, iron bars, angle iron, channel, or flatiron is a common task for the tools in blacksmithing. It has the appearance of a double-faced hammer.

These are used for severe work and have a higher weight. Their weight ranges from 4to10 to kg.

4. BallPeen Hammer

Ball peen hammers are generally made of high-carbon steel that has been honed to a smooth surface. It has a flat striking hammer face and circular bell. The hemispherical is widely used for delicate rounding work and gasket fabrication.

Ball peen types of hammers are commonly found in the toolboxes of machinists, metalsmiths, and blacksmiths.

It’s one of the various hammers used for jobs like riveting, with a stopping tool that allows you to pound the rivet into the metal and round it.

5. Rubber Hammer

The rubber hammer, also known as a rubber mallet, is an exceptionally useful instrument when gentle but strong strikes are required. Upholstery hammers, woodworking hammers, and sheet metal hammers are all frequent uses for this type of hammer.

Because the rubber head produces minimum damage, it’s an excellent choice for hammering materials like plasterboard into place.

6. Tack Hammer

Upholstery hammers, also known as tack hammers, are used by persons who make seats and chairs with soft cushioning. This one-of-a-kind hammer has two long claw-like heads, one of which is magnetic.

These hammers are used to pound upholstery into wooden frames using tiny nails. One feature is magnetic hammers.

7. Dead Blow Hammer

Hammerheads of this type are designed for low recoil and mild strikes. A solid rubber or plastic head, or a semi-hollow head filled with sand or a lead tablet, is frequently used.

They’re utilized in a variety of industries, from carpentry to automotive, to help destroy components, repair minor dents, and bang wood together or beyond without marrying the surface.

8. Knife Edge Hammer

For all intents and purposes, a knife-edged hammer resembles an axe with a flat square hammer on the other side. It’s considerably simpler to cut and split wood with a knife edge, and sharpening the wood is easier with a flat surface.

The combination of softening the wood(or pushing )and splitting it with the edge of a knife is ideal.

9 Brick Hammer

A brick hammer is a tool used by stonemasons to shape and breakstone, brick, and concrete. It features a smooth square face and a sharp chisel peen.

The benefit is that you don’t need multiple types of hammers or two hands to cut or shatter rocks with a chisel with enough weight.

A hammer’s blunt end is used to break stones and hard masonry, while a chisel’s form is used to round the edges and small bits of stone.

10. Framing Hammer

You can avoid applying unnecessary force to massive nails by using the framing hammer. It weighs nearly twice as much as a standard claw hammer.

The claw hammer-like device looks like it. The framing hammer got its name for a reason. A straight claw and a waist head make up the framing hammer.

Its main job is to put the home frames together. It’s called a framing hammer for a reason.

11. Drywall Hammer

A drywall hammer, as the name implies, is used to round up or down drywall. It frequently has a serrated front face, which makes it better for pounding nails and driving them precisely than a conventional hammer. Drywall types of hammers are a unique instrument that is likely more helpful than it appears at first.

The waffle form on the classic impact head allows you to hammer nails into drywall without destroying the outer layer. In addition, it creates a bevel on the wall, which is helpful when applying new layers of plaster or other materials.

A basic nail extractor, an anax-shaped sharp edge for scoring, and a handy hook area loathe opposite sides of the hammerhead. People move drywall strips with their hammers.

12. Body Mechanic Hammer

This hammer is made up of a flat head, a long peen, and a conical die. They are used in conjunction with a bent anvil to eliminate the dent in the car’s panel. A body mechanic’s hammer is another name for it.

13. Planishing Hammer

These hammers have a cylindrical die and a beak with a somewhat convex head. During the planning stage, it is used to precisely shape and smooth the metal, allowing it to adopt the shape of the snakehead.

Leveling types of a hammer are tiny hammer that is typically used to shape smooth fine-shaped metal. It is made up of two similar hammers, one with a convex die and the other with a cylindrical die with a peen point. Because of the form of hammers, they may apply a lot of force while causing minimal damage to the metal.

14. Prospectors Hammer

This hammerhead is popular among geologists due to its flat, smooth, or textured stunning face. The peen tapers to a single spike-shaped claw that comes in during the attack. Complex groundwork The handle is short and ergonomically designed to minimize hotspots while maintaining a firm grip.

The prospector’s hammer, co14 Prospectors Hammer only associated with geologists, consists of a flat-edged hammer for smashing stones and a chisel tool for more intricate operations. These are the hammers seen in movies depicting scientists excavating fossils.

15. Power Hammer

In a power hammer, a massive piston is moved up and down by compressed air to shape the material below. A power hammer, as the name implies, is capable of applying extreme pressure by using compressed air to power huge pistons.

The hydraulic mechanism has been refined for shaping steel and other comparable materials that are less flexible when hammered by hand. You can comprehend the potential power when you realize that the piston’s head may go up and down 200 times per minute.

16. Splitting Maul Hammer

A splitting hammer looks like a combination of a sledgehammer and an ax. The head of the ax is sharpened to the point used to break the tree.

The side of the hammerhead of the sledgehammer can be used to hit the tree, or more generally, to drive nails into the tree as much as possible to prepare it for the tool. Both sides of the head are designed to reduce the chance of getting caught in a tree.

17. Straight Peen Hammer

It’s similar to a cross peen hammer, however, the peen is angled vertically instead of horizontally. Straight peen hammers, like cross peen hammers, are used for shaping and nailing metal.

The main difference is that the cross peen hammer’s peen (pointed end) is parallel to the hammer shaft rather than vertically. The size and shape of the peen, as well as the ends of the block types of hammers, may vary.

18. Welder’s Hammer

A chipping hammer is another name for welding hammers. At one end, there’s a spherical chisel, and at the other, there’s an upright pein. This hammer’s handle has a spiral pattern that resembles spring.

This helps to spread the heat, and the hammer removes the slag from the welding places when the weld bead has had time to cool.

19. Soft-Faced Hammer

Soft hammers are utilized on projects that are prone to leave scars when we strike a hammer blow. Wood, Bakelite, plastic, brass, copper, or aluminum are used to make these hammers. Mallet refers to a wooden hammer.

Some plastic or nylon hammers are constructed in such a way that the interior of the hammer is composed of iron. They feature a cap made of plastic or nylon on both ends.

These types of hammers are called “hide hammers.” These can also be made to be extremely heavy. These hammers are depicted in the diagram.

20. Half Hatchet Hammer

The half-hatchet hammers are a combination of an ax and a hammer, giving the user a choice of possibilities. It’s also known as a rigging axe, and it’s useful in a variety of situations.

The ax blade on this hammer gives it an interesting look. It may be utilized for a wide range of activities, making it ideal for use as an emergency toolkit.

22. Blocking Hammer

On one side, the hammer has a flat, square head and on the other, it has a cylindrical head. Another hammer used by blacksmiths is this one. On a block or anvil, it can be used to shape metal.

This hammer features a flat square head on one side and a cylindrical-shaped head on the other, while the wooden handles are traditional. The Blocking types of Hammers are ideal for working with metal on an anvil or block.

23. Bushing Hammer

With an extended metalhead, the bushing hammer resembles a tenderizer. They are used to provide a stone with a rough texture, which can be attractive or make the stone’s path less slippery.

24. Brass Hammer

The brass hammers are made to pound steel pins without causing damage to the surface. It may be found in both car and woodworking shops. The tapered, cylindrical double-head of a brass hammer is used to sharpen steel pins without injuring the surrounding surface.

The brass hammer, as its name implies, has a brass cylindrical double head that is ideal for striking steel pins into various materials without causing damage to the surrounding region.

While it may be utilized in a variety of situations, it is most commonly employed in the automobile sector and conventional woodworking industries

You May Also Like

Share This Post

Types of Hammers & Their Uses