Tiling Tools & Equipments

The tools and equipment used for tiling work or flooring work are called “Tiling Tools”. Equipment for tiling, like any tools, might be costly, but they can make the job a lot easier. If you’re just going to tile once in a while, renting certain tools for when you need them might be a good idea.

Types of Tiling Tools & Equipment

The following are different tiling tools and equipment used for flooring work,

1. Tile Power Saw

Another approach to cutting tiles in straight lines is with a Tile Power Saw, which is very useful when cutting huge quantities of tiles or thick, tough tiles (such as floor tiles).

They include an inbuilt water tank/tray that pumps water to the cutting surface (to cool the cutting blade), however, this can make them a bit messy. Although a DIYer may not be able to afford the purchase price for one-time tiling work, these saws are frequently available for hire.

Read More: Top 10 Best Tiles Company In India | Top Tiles Brand In India

2. Tile Removing Chisel

Chisel Tiling Tools for removing tiles This is a tool that the do-it-yourselfer should hire, along with the power tool that goes with it. With a cranked blade, removing tiles is simple and quick, with minimal damage to the backing wall or floor. It’s also good for removing plaster. Worker with a hammer and a tile-removing chisel

3. Grout Rake

A specific tool with a narrow hardened blade is used to remove old and discolored grout. By moving the blade along the grout joints, you may remove the old grout and make way for the new grout to be applied.

4. Grout Spreader

The grout is spread across the tiles and into the gaps between them with a grout spreader.

It includes a flexible squeegee edge that allows you to move the grout around without hurting the tiles’ surface. Because grout can be abrasive, the squeegee edge can become worn and ragged over time, and it will need to be replaced to ensure a proper grout finish.

5. Notched Spreader

For modest tiling jobs, a basic plastic spreader for the adhesive should be enough for spreading the tile adhesive across a wall or floor prior to positioning the tiles. Spreaders with steel blades, on the other hand, can be purchased and will last a lifetime.

For different types of tiles and/or locations, different forms and sizes of notches are employed. The ‘V’ notches are for ‘light/ordinary duty areas,’ while the square notch is for ‘heavy-duty places.’ Notched spreaders frequently feature at least two sets of profiles on the edges, ‘V’ and square.

Tiling with the ‘V’ notch results in a lesser percentage of area coverage of the back of the tiles than tiling with the square notch – a high percentage of area coverage is critical in areas where the tiles may be subjected to large amounts of water contact, such as showers.

Read More: What Is PVC Flooring | Types of PVC Flooring | PVC Tiles | Plastic Flooring

6. Tile Trowel

A tile trowel similarly applies glue to a Notched Spreader (above), but it is more convenient to use for tiling big areas.

7. Profile Gauge

A profile gauge aids in the transfer of difficult shapes to tiles for cutting. They’re not just for tiling tools; they’re also handy for carpentry and other crafts.

8. Tile File

A Tile File is used to shape and smooth the rough edges of tiles. Because files work slowly, they should only be used to remove little amounts while shaping tiles. The file should ideally have a flat and curved face so that it may be used to file straight edges as well as contoured shapes.

9. Tile Hole Cutters

An alternative to Tile Drills has a diamond cutting edge that squarely touches the tile surface. These hole cutters come in a variety of sizes, ranging from 12 to over 100mm in diameter, and should be used with a power drill to provide a smooth and clean finish.

To avoid early wear, the cutters are usually lubricated with water. Because the cutter lacks a locating point, it can be difficult to keep it in place on the tile face to start the hole; however, using the cutter in a drill stand or securing the tile can help.

10. Tile Drill

Tile Bits Drilling glass, tile, and mirrors necessitate the use of special Carbide-tipped bits. They can be used with a manual drill, but they work best in a slow-speed variable-speed power drill.

When drilling glass, add a lubricant (such as turpentine or white spirit) to keep the tip cold – make an ‘O’ ring out of putty around the needed hole position and fill it with the lubricant to keep the bit tip lubricated at all times.

A masonry bit can also be used to drill ceramic tiles if it is used at a slow pace and without hammering.

Read More: Vitrified Tiles | Vitrified Floor Tiles | Types of Vitrified Floor Tiles | Pros and Cons of Vitrified Tiles

11. Tile Hand saw

To cut unusual shapes and other items faster than with nippers, a tile saw is required. They have a frame that holds the ends of a unique tile-cutting blade, similar to a hacksaw. The gap between the blade and the back of the frame must be sufficient to accommodate a tile that is being cut.

The particular tile cutting blade has cutting edges on both sides and is usually circular in section. Always work from the glazed side of the tiles and cut on the downstroke when using a tile saw.

12. Tile Nippers

Tile nippers are hand-held instruments that are used to carefully cut away small, often uneven, sections of tile.

13. Scribe On Tiles

A tile scribe is typically used with a hard Tungsten Carbide Tip to score the glazed surface of tiles so that they can be broken along the scribe line. To guarantee that the scribe mark is straight, it must be applied against a straight edge.

14. Tile Cutter

A tile cutter a tile When cutting huge numbers of tiles in straight lines, a tile cutter comes in handy. There are a variety of designs available, but the most common include ‘a scribe wheel’ that is moved across the tile and a breaking arm that is pushed down after scribing to break the tile along the mark.

Cutting tiles with a tile cutter is faster and more dependable than using a tile scribe once you get the hang of it. When purchasing a Tile Cutter, make sure it can handle the largest tile being used and that spare scribe wheels are available to replace them when they become worn.

These are some of the tiling tools that every professional tiler should have. Some of the no professionals or not having enough money tilers may not use all of them and use some alternate methods to perform certain tasks done by these tools. For having near to precise tiling tools these tools are a necessity.

15. Tile Rub Stone

The use of tile rub stone removes any leftover sharp edge or uneven edges of the tiles and make smooth edge tiles. using tile rub stone is an easy, fast, and inexpensive way to get smooth-edged and round-edge tiles. This works as sandpaper. also, rubstone is used for cutting tiles and other materials.

16. Straight Edge

A straight edge tool is used for finding the surface or edge of a tile is straight or not and is also used for the layout work of the tile. The most important thing is selecting the right type of surface edger.

The following type of surface edger is used for tiling,

• I-Section Straight Edges
• Camelback Straight Edges 
• Rectangular straight edges

17. Spiral Mixer

If you require a large amount of grout for tiling tools work then you should invest in the spiral mixer tool, because this tool helps a lot, and work is done easily and fast. this spiral tool is attached to a power drill. when the mixture is ready at that time you should have a gallon bucket to hold the product.

You May Also Like

• Top 10 Best Tiles Company In India | Top Tiles Brand In India
• Vitrified Tiles | Vitrified Floor Tiles | Types of Vitrified Floor Tiles | Pros and Cons of Vitrified Tiles
• What Is Concrete Grinder | Types of Concrete Grinders | Walk Behind Concrete Grinder
• What Is Flooring | 10 Types of Flooring | Best Flooring for House In India
• What Is PVC Flooring | Types of PVC Flooring | PVC Tiles | Plastic Flooring