How to Remove Mold from Wood: Effective Techniques

Generally, molds grow in a wooden area, due to wood is good at water absorption. Water adds to moisture warm temperatures and grows mold, always in the air substance, and that is a perfect storm for an infestation of mold.

The mold-affected area is not more than 10 square feet and you can easily be removing a growing mold. But do not delay because a high chance to expand the mold colony. So, How to Remove Mold From wood at home?

Materials Needed to Clean Mold Off Wood

• White Vinegar
• Wood Cleaner
• Detergent
• Chlorine Bleach
• Sand Paper

Read More: Difference Between Wood and Timber | What Is Wood | What Is Timber

How To Remove Mold From Wood

Following steps are included to remove mold from wood properly,

• Step 1: Select the right cleaning solution for the work.
• Step 2: Put on the Necessary Protective Gear
• Step 3: Use a cleaning solution and scrub the affected area.
• Step 4: The sand process is the severely affected area.
• Step 5: Clean properly and then dry the affected area.

Step 1: Select The Right Cleaning Solution For The Work

You are selecting a solution for cleaning a mold which is depending upon the mold species and growth of mold.

The solution or mold killer is penetrating the wood surface and gives a mold-free surface other side household items like bleach and white vinegar also help to kill small surface growth mold.

If you find severe mold and black mold then you should go for a commercial-killing product.

Enlisted a Mold Killing Solution

• Hydrogen Peroxide
• White Vinegar
• Rubbing Alcohol
• Bleach
• Detergent
• Fungal removal product
• An important tip keeps in your mind, that does not to mix bleach with any other solution that is ammonia in it.
• This mixture will cause a reaction and lead to an explosion.

Step- 2: Use the Necessary Protective Gear

It is important to remember mold and mildew are substances that can be harmful when inhaled.

If you use a cleaning solution powerful, then you do not touch it directly without protection because it can harm your skin.

For that reason, you should wear the right protective wear whenever you remove mold from wood and clean the surface.

Necessary protective tools or equipment include:

• Respirators/ Air mask: to prevent mold from getting in air passageways.
• Rubber gloves: To protect the hand from mold and solution, bleach.
• Safety goggles: To protect eyesight from any harmful chemicals and sprays.
• Full sleeves cloth: To cover all body parts against the chemical.

Read More: Which Is Best Wood For Furniture | 8 Types of Wood For Funiture

Step 3: Use A Cleaning Solution And Scrub The Affected Area.

Before scrubbing the surface, you can wear protective gear and apply a solution to a wood surface.

Again you can choose a scrub pad or soft bristle brush, make sure it is a low abrasive so do not lead to damage surface.

Using a spray bottle, apply a solution all over the affected surface and then scrub gently until you can see the disappear mold with the help of a brush and scrubbing pad.

Be sure to start a work gently and add more force if required,

Step 4: Sand Process In Severely Affected Area

As mentioned above, the different types of mold species and varying levels of fungi growth.

If you see the problem, that mold on a wood area just is on the surface, but if it is growing as fungi roots and they have penetrated into the wood.

In that case, scrubbing is not preventing a re-growth of mold. At that time use a sanding process.

In This process, you want to put on safety goggles for preventing wood chips from getting in your eyes.

This is held either by using a sander at a low abrasive rate or by hand, firstly you all clean up the surface and then apply a solution and scrub again in that same area.

Repeat the whole process until you can scrub away any fungal residue.

The sanding process is start with a low level of grit in your sanding material and is built up from there.

Use 100 grit sandpaper to first pass, if this is not penetrating enough too deep inside the wood get rid of all mold.

Then move up 220 grit sandpaper and repeat the scrubbing and sanding process.

But the main disadvantage is sanding process is more easily damaging the wooden furniture than other processes of removing mold.

Step 5: Clean Properly And Then Dry The Affected Area

Once you completed the scrubbing and sanding to remove mold from wood, then make sure to finish and clean up the area.

The next step is taking a final pass at the area you all work with paper towels and rags, this additional step helps for preventing a mold from spreading again.

Lastly, make sure the workplace is fully dried and well ventilated. If you are working with minimal ventilation, in that case, need a fan for drying the surface properly.

In either case, take more time to ensure the surface is dry.

Read More: Seasoning of Timber | Seasoning of Wood | Timber Seasoning

FAQs

You May Also Like:

• Difference Between Wood and Timber | What Is Wood | What Is Timber | What Is Lumber
• Seasoning of Timber | Seasoning of Wood | Timber Seasoning | Natural Seasoning of Timber | Artificial Seasoning of Timber
• Which Is Best Wood For Furniture | 8 Types of Wood For Funiture | Types of Wood Furniture
• How to Remove Stain from Wood (Best 9 DIY Tips & Tricks)
• Varnishes | What Is Varnish | 6 Types of Varnish | Types of Wood Varnish | Types of Varnish Color | Varnish Uses
•  Most Popular Types of Wood | Wood Types | Different Types of Wood