Building layout is like planning where to put things when you’re constructing something. It’s about deciding how spaces connect and arranging structures on a site. Whether it’s a house or a shopping area, the layout is essential. It helps use space well, makes movement easy, and follows rules for the area. Good layout planning involves architects and engineers working together, considering the land’s shape.
What Is Building Layout?
Building layout refers to the process of designing the physical layout of a building or structure, including its shape, size, orientation, and positioning on the construction site. The building layout is an important aspect of the construction process as it determines the overall appearance, functionality, and efficiency of the building.
The building layout design process involves taking into consideration various factors, such as the intended use of the building, the surrounding environment, building codes and regulations, and the budget for the project. The layout must also take into account accessibility and safety considerations, such as the placement of entrances, exits, and emergency exits.
Building Layout Method
For the simplest building layout, as in a rectangle, a line connected to corner posts marks the building’s outline, and a line can be attached to a nail on top of the post.
To cut off 90-degree angles for the remaining corners, utilize a theodolite, builder’s square, or site square. Ranging rods can be required to create a straight line between corner posts.
The corner posts are generally 50 mm x 50mm wood posts with a nail in the middle driven firmly into the ground. Dried lime or a similar powder can be used to draw the outline on the ground. Timber profile boards can be used at the corners.
The profile board is generally 0.6 m -1m tall and made up of two 50 mm x 50mm posts and a 150 mm X 38mm cross-board pushed a minimum of 600mm into the ground.
When a building’s shape is more complicated than a conventional rectangle, a range of points must be established in the same manner that a conventional rectangle must be laid out. However, extreme caution is needed, as the number of points increases, small mistakes are more likely to happen.
The simplest approach to laying out an irregular building form is to start with a big rectangle that will surround the entire structure or a major portion of it. After that, deductions, as well as adjustments, can be done to get the exact layout needed.
The building layout method includes three stages,
- Trenches
- Reduced Level Excavations
- Framed Building
1. Trenches
The trench plan determines the direction, size, and shape of the excavation, as also the breadth and location of walls.
Trenches are excavated once the building outline has just been established. For correct hand excavation, a line of dots of dried lime powder is often marked, whereas a centerline is drawn for exact machine excavation.
To manage trench location, breadth, and depth, outline profile boards are often utilized.
The profile boards must be placed at least 2 meters away from trench sites so that they do not disrupt excavation activity.
To indicate a top of the concrete strips that will be poured later, pegs are frequently hammered into the bottom of the trench.
A corner of walls is relocated from crossing cord lines to mortar locations on the concrete foundations utilizing a spirit level for accuracy.
Trench cutting should be done with extreme caution, particularly whether they have to be left open for a lengthy period of time since the sides may cave in.
2. Reduced Level Excavations
A baseline can be used to draw the overall outline of a lower-level area. The corner post is secured to an excavation area’s outline, which is defined with dried sand or equivalent material.
The sight rails are set at an appropriate height and within locations that enable a traveler to be utilized to control the depth of the excavation.
The traveler is indeed a fixed-height profile board that is used to manage excavation levels within profile boards.
By positioning the traveler in the sightline between two-level boards, it is necessary to assess whether or not the excavation is conducted to the correct levels.
3. Framed Building
Framed structures are generally connected to a grid and are often laid out through a baseline. Gridline crossings indicate the center locations for isolated or pad foundations.
The theodolite is used to draw out the grid, as well as pegs are used to indicate grid intersections. After the grid has just been laid out, offset pegs could be installed out of the way of any future excavation operations.
A traveler seen between sight rails or even a level with staff tied to a site datum can be used to control excavation depth.
The building layout is one of the important and preliminary steps in any building construction project. The foundation marking and building layout should be done with high accuracy because they can not be changed after work has been processed.
Read More: Types of Foundation In Building Construction
Building Layout Tools
The most widely used layout tools are as follows:
1. String line
To differentiate the dimensions of a building layout, a sledgehammer is utilized to drive corner pegs, batter boards, as well as posts into the ground.
2. SledgeHammer
The sledgehammer is utilized to drive corner pegs, batter boards, as well as posts into the ground.
3. Posthole Auger
In some soils, the posthole auger is utilized to drill the holes needed to correctly set posts.
4. Handsaw
For cut batter boards as well as posts, a handsaw is needed.
5. Hatchet
The hatchet is used to sharpen batter-board posts as well as stakes.
6. Hammer
When building batter boards, you will need a hammer.
7. Chalk Line
To produce a straight guideline, the chalk line is required to put chalk on the surface.
8. 30 Meter Tape
The 30-meter tape is being used to measure diagonally (typically in 100-foot lengths) and also to draw out excavation and foundation marks.
9. Tracing Tape
For placing excavation or foundation lines, tracing tape is utilized. This tape is roughly 1 inch broad and composed of cotton fabric. It generally comes in a length of 200 feet.
10. Carpenter’s level
The carpenter’s level is being used to sight level lines as well as level a surface. It can be utilized with a straightedge or immediately on the surface.
11. Line Level
The presence of a spirit bubble on the line level shows that it must be level. When it is put midway between the spots to be leveled, it gives the best results.
12. Automatic Level
An automated level can generate grades across short distances by measuring estimated changes in elevation. The landscape, level bubble, as well as index line, may all be seen in the tube.
13. 8d Nails
8d nails are used to secure the string line to a batter board.
14. Plumbing Bob
Corners of a building measurement are located using a plumbing bob.
15. Framing Square
The proper squareness of lines is checked using a framing square.
Types Of Building Construction Plans and Drawings
The building plans are a series of diagrams that include site plans, floor plans, elevations, cross-sections, plumbing, electrical, as well as landscaping designs for the convenience of construction on the worksite.
The drawings are a way through which an architect or designer’s thoughts and conceptions are turned into actuality.
Various types of drawings are provided by an architect based on the details and complexities of the project for simplicity of understanding as well as smooth operation of the construction process. Several of the various types of drawings are explored in detail below,
- Site plan
- Floor plan
- Cross section
- Elevation
- Landscape plan
1. Site Plan
The site plan is a detailed diagram that displays the whole layout of a building. It indicates the site’s borders including access points, as well as nearby structures that are important for the design.
These plans must follow local development laws, which may include limitations on historical sites. It works as an official agreement for obtaining government approval for construction.
A certified specialist, such as an architect, landscape architect, and engineer, must develop the site plan.
In the case of a construction project, the site plan must include indicating all essential connections, such as drainage as well as sewer lines, electrical and communications cables, water supply, external lighting, and so on.
2. Floor Plan
The floor plan viewpoint is described as a vertical orthographic view of an object onto the horizontal plane crossing through the structure.
The floor plan is a great detailed description of the room layout. The floor plans are created regardless of whether they will be used in the construction of a house, store, or commercial project.
The applications involve a knowledge of the size and various types of installments. This helps to acquire a perspective of how the limited room area should be used.
A drawing, often to scale, illustrating the interconnections between rooms, spaces, and some other physical elements with a single level of the structure, floor Plan Specifications, Interior walls including corridors, restrooms, doors and windows, refrigerators, water heaters, and so on.
3. Cross Section
Cross-section illustrations depict viewpoints of the house as if you had cut down through the roof with a saw and looked through a resulting opening.
These perspectives will enable the builder to better understand the inner and external construction details. The more complicated a housing design, the more and more cross-sections should be included.
The cross-section drawings can be used to illustrate wall and roof frame elements, external wall layers, staircase structure, and even interior features like soffits, cabinets, and ceiling height.
Window measurements, exact positions in reference to interior walls, and heights with respect to a ceiling or floor are also shown in cross-sections. Apart from sections that expressly specify the wall or floor layer, cross-sections generally may not reveal completed wall or flooring materials.
4. Elevation
Elevation diagrams are a type of architectural drawing that shows a building or a part of a building. A drawing of a building’s interior surface taken from a vertical plane looking straight at it is called an elevation.
This is the same as if you stand right in front of a structure and looked at it. The elevations are a popular design drawing as well as a professional architectural or engineering standard used to graphically represent buildings.
Elevation diagrams are orthographic projections. This indicates there is no foreshortening as well as they are not depicted in perspective. A projection sketch of a single side of a building is known as an elevation diagram.
The elevation drawing’s aim is to show how a specific side of the house will look when finished, and also provide vertical height measurements. Four elevations are generally sketched, one for each side of the house.
Typically, an elevation plan contains the identification of a house particular side which the elevation shows, doors, and windows, Material symbols, grade lines, roof features, finished floor along with ceiling levels, decks and patios, Porches, location of exterior wall corners and dimensions of key elements in the vertical plane.
5. Landscape Plan
The landscape design is similar to an outdoor area for the floor plan. The landscape design, similar to a floor plan, produces a visual representation of a location utilizing scaled measurements.
Natural features such as trees, flowers, and grass, as also man-made components such as garden furniture, waterfalls, and sheds, are all included in landscape plans.
Overlays for irrigation as well as lighting are also included in landscape designs.
Landscape plans are generally utilized to plan the layout of outside space, whether that is a private garden plan for the house or a commercial plan for a business.
Making the landscaping plan can also help with the material selection process. Also, it provides the owner of the property as well as the landscaping contractor with better cost-estimating tools, allowing the project to be finished within financial limitations.
You May Also Like:
Pingback: What Is Building Layout | Layout Of Building Plan | Contractors News Daily
I was scrolling the internet like every day, there I found this article which is related to my interest. The way you covered the knowledge about the subject